整流變壓器

產品概述 丨 Product introduction

整流變壓器是將高電壓電網的三相正弦交流電壓變換為整流裝置所需要的多相數碼的低電壓，并通過相位角的變換改善交流側及直流側運行特性的以—種專用變壓器,其廣泛應用于鋁、鎂、鋅、錳、食鹽電解等化學整流以及冶煉等需要大功率直流電源的場合。

● 整流變壓器按相數分：3相、6相、12相、24相、多臺組合可達更多相數。

● 按結構類型分：有器身結構,單器身結構及共式結構。

● 按油箱類型分：有箱蓋式，半鐘罩式等結構。

● 按出線方式分：有頂進頂出,頂進側出等結構。

● 按調壓方式分：有無載調壓及有載調壓形式。

Rectifying transformer is three-phase sinusoidal wave alternating voltage of the high voltage network convert to poly-phase low voltage of the rectfy devices. It is a specialized transformer for the transformations of the phase angle toimprove the working characteristics of the side of the AC and DC.lt is widely used in aluminum,magnesium,zinc,manganese, brine electrolysis etc., chemical rectifier and smelting industry and large power DC current situation.

● Phase: 3-phase，6-phase，12-phase，24-phase，Poly-phase.Combination in multiple rectifier transformers can makemore phases.

● Structure: active-part structure, individual active-pact structure and common-mode structure.

● ooil tank:cover tank and bell type tank.

● Method connecting wire: from top entry to top-terminal, from top entry to side-terminal.o 

● Voltage regulation mode: off-circuit tap-changer and on-load tap-changer.

技術參數表 丨 Reference specifications

注:表中數據僅供工程技術人員設計選型時參考，所列數據如軌距、重量及外形尺寸允許在生產中作適當調整恕不另行通知。如有特殊要求,請另行說明。

Note: The product is subject to change without further notice. The data contained in this manual is or reference only, such as gauge, weigh, and outline dimension.For the special requirements, please feel free to contact us.